Car Battery: You might often worry when it comes to changing the battery of your car. But, let me tell you that this job is not rocket science and is very easy. It is completely a straightforward process and can be done with a few pieces of equipment.
How To Change The Car Battery
- Find the battery of your car
- Locate and disconnect battery terminals
- Remove old battery
- Clean battery tray and terminal connectors
- Install and secure a new battery
You can become a money-saver by changing the car’s battery yourself with the following steps:
Find The Battery Of Your Car
Credit:google
The very first step you have to follow is to park the car, turn off the engine and remove the key from its slot. You have to wait till the engine is off, as you can hurt yourself with the warm engine. In many cars, the batteries are placed at the front of the vehicle, under the bonnet, and set up on a plastic or metal tray.
Although, some cars have their batteries placed at the back of the vehicle in the trunk.
Place And Disconnect Battery Terminals
Credit:google
A battery has two terminals where cables get connected. They may have plastic covers. These add a black one, negative, and a red one, positive one. The terminals are marked with a (+) sign denoting a positive terminal and a (-) sign denoting a negative terminal.
Firstly, you have to disconnect the negative cable. To do this, you have to ensure that you have your gloves and eye protection on. Use a wrench to loosen the bolt that is placed at the negative connector to the car battery terminal.
Once, it gets loose then gently twist the cable connector back and forth and lift it up to take it off. Do the same process to remove the positive cable.
Remove Old Battery
Credit:google
Car batteries are mostly secured with a metal bar on them. Lose the holding bar to remove it and take the car battery out of it. Car batteries have caustic liquid inside them. Also, ensure to keep the battery straight at the time of removal.
Clean The Battery Tray
Credit:google
Soon after you remove the battery, clean the connectors thoroughly. It is advised to clean the battery with a car battery cleaner and a wire brush to clean it. Otherwise, you can also use the baking soda paste for it.
After cleaning, make sure to dry each and everything. Check out the cables and connectors to make sure they are not harmed or unraveled.
Install And Place A New Battery
Credit:google
At the time of installing the new battery, make sure to place the terminals in the correct manner. Lower the car battery in the slot in the car and in the mounting shelf. Tuck the clamp and hold down the metal bar and make it tight.
You can acknowledge using protective felt washers or battery anti-corrosive protection gel on both ends. Make sure to check whether the battery is working or not.