In the summer season, AC is used in most of the houses. Now that the summer season has arrived once again, the ACs that were not working have also started working. If you are going to run the AC to avoid the heat, then you should take some precautions. Actually, there are frequent reports of AC blasts during the summer season. In such a situation, caution should be taken before running an AC that has been idle for months. Let us tell you that summer has not even started properly yet. Therefore, the use of AC is also less but, one mistake of ours can cause huge loss.
Why Do ACs Catch Fire in Summer?
In summer season, AC runs continuously for many hours. If its servicing is not done on time or the internal parts are weak, then it can become dangerous after some time. However, before such accidents, AC definitely gives some warning signals. If these are identified in time, then major damage can be avoided.
- Burning smell coming from AC can be a sign of heating in wiring or circuit.
- Sparks or loud noises indicate compressor or electrical fault.
- Smoke or light fog coming out of AC is a dangerous signal. In such a case, turn off the AC immediately.
- Frequent on-off cycles indicate system malfunction due to overload or voltage fluctuations.
- AC unit heating up abnormally may indicate component overheating, which could cause a fire.
If you see any of these signs, then immediately turn off the main supply of the AC and show it to a professional technician. A little caution can prevent a major accident.
Essential AC Safety Tips Everyone Should Follow
AC definitely provides relief in summers, but negligence in its care and use can become a big danger. Accidents like fire, short circuit or compressor explosion occur only when we ignore some basic safety rules. A little caution can provide you and your family a safe and comfortable environment in summer
- Get your AC serviced every season.
- Do not use local faulty wiring.
- Always plug the AC into the power socket.
- Do not plug multiple devices into the same socket.
- Use a separate strong electrical connection for AC.
- Use stabilizer to avoid voltage fluctuations.
- If there is sparking or a burning smell, turn off the AC immediately.
- Do not use local or counterfeit parts.
- Do not run the AC for a long time in a closed room.
- Always get your AC repaired by a professional technician
Are Old or Local Brand ACs More Dangerous?
Often the wiring, condenser and compressor of old ACs become weak. Apart from this, local or non-ISI marked ACs lack safety standards, due to which there is a greater risk of short circuit or overheating. If the AC is more than 7-8 years old, then it is necessary to get it serviced as well as electrical check done. While buying a cheap AC, do check its testing report, customer reviews and safety features.
Is It Safe to Run an AC All Night?
Many people run the AC all night in summer, but keep in mind that if there is no ventilation in the room or the AC is old and unserviced, it can cause fire or overheating. In such a situation, it would be better to set a timer at night, so that the AC automatically turns off after a few hours. Also keep the window or ventilation of the room slightly open so that hot air can go out.
Why You Need a Surge Protector or MCB for Your AC
A surge protector or mini circuit breaker (MCB) shuts down the system in case of a sudden surge in current, preventing short circuits and fire hazards. This is a small investment, but extremely important for safety.
BIS (Bureau of Indian Standards) mark is a guarantee of safety, quality and standard compliance of any electronic product. If an AC does not have BIS mark, it means That it does not meet the Indian safety standards. There is a greater risk of incidents like short circuit, overheating or fire in such ACs.
